Forum is online

Posted on 31. January 201912. February 2019 | No Comments

A new discussion board lets you ask us questions about the products we offer. We also encourage suggestions concerning future products and discussions among our customers. Critical posts are not only welcome but explicitly requested.

Cloud Palamoa

Posted on 21. January 201921. January 2019 | No Comments

egnite has released a first trial version of a sensor cloud (palamoa.de). The name Palamoa derives from the Hawaiian word for cloud. This sets the cornerstone for a flexible IoT platform for interconnected real time applications. Although the test version’s functionality is still restricted, it already allows for the configuration of a so-called dashboard that […]

New Sensor Cap for Querx TH and Querx WLAN TH

Posted on 25. October 20186. November 2018 | No Comments

A few months ago we began shipping Querx TH and Querx WLAN TH with a case made of ABS plastic, which replaced the non-hygroscopic shrinking tube that was previously used. Version 1.1 of Querx TH and Querx WLAN TH now ships with a newly developed sensor cap that features two significant improvements. Whereas the previous […]

Firmware Update: Initial Version 4.2.0 Available for all Querx Variants

Posted on 11. July 20185. October 2018 | No Comments

Version 4.2.0 of our firmware has passed all basic tests, although a number of stress and long-term tests still need to be performed. We still think that this new firmware will prove itself in productive environments, which is why we want to make this preliminary version available. Querx TH Beta-Version 4.2.0 Querx THP Beta-Version 4.2.0 […]

High Tech at Olympia Tower in Munich

Posted on 29. June 20176. July 2017 | No Comments

The 23rd annual trade event „Hightech auf dem Olympiaturm – Messtechnik München“ is taking place in Munich on the 5th and 6th of July 2017. Among other things, you will be able to take a look at the Web Thermo-, Hygro-, Barometer Querx THP at the organizer Meilhaus Electronic’s booth.

Querx PT’s Sensor Cable Connector Has Changed

Posted on 28. May 201725. October 2018 | No Comments

Up until now, the Querx PT models’ (Querx PT100, Querx PT1000, Querx WLAN PT100, Querx WLAN PT1000) pair of two-wire connectors, into which the 2-, 3- or 4-wire sensor cables are clamped, were stacked vertically. Querx PT – Version 1.0 From version 1.1 on, the four screw-terminals are placed side by side so the individual […]

Trade Fair FBS2017: Dialogue with a Sensor

Posted on 9. April 201722. May 2017 | No Comments

On the 31st of March 2017 the FBS2017 trade fair for digitization and IoT was hosted in our building in Castrop-Rauxel, Germany. We attended the fair and set up a booth. A Node.js server was installed on the web, in order to stage our Querx sensors’ integration possibilities. The server continuously received the current values […]

Querx WLAN Sensors Listed Among the Technical Innovations of 2016 by tk-report minus 18

Posted on 10. March 201710. March 2017 | No Comments

In its first issue of 2017, the German refrigeration magazine tk-report minus 18 lists the technical innovations of 2016 and highlights useful applications for industrial users of refrigerators or cold rooms. The Querx WLAN sensors’ logging capabilities are emphasized, as they facilitate the compliance with HACCP documentation requirements in the food service sector. The […]

DAkkS Calibration Certificates for Querx Sensors

Posted on 13. February 20176. September 2017 | No Comments

Having measurement devices checked in a laboratory accredited by the DAkkS (German Accreditation Body) will assure you that the calibration was conducted in compliance with all current norms and laws and on a level that is internationally comparable. The temperature of a calibration object is measured by the device that is to be calibrated and […]

Calibrating Querx Sensors

Posted on 30. January 20176. September 2017 | No Comments

When calibrating a device, its measurements are compared to an exceptionally precise reference device. The device that is calibrated is not intended to be adjusted in this process. DAkkS-Calibration egnite offers the Querx network sensors with the option of calibration certified by the German Accreditation Body (DAkkS). Whether or not you require this depends on […]

Temperature Sensors for Querx PT

Posted on 17. January 20176. November 2018 | No Comments

Querx PT ships with a test sensor. This lets you use the device right out of the box by connecting it to an Ethernet network and a power supply. However, this sensor is really just a simple test sensor with a 100 mm PVC cable but no protective sleeve. While it returns reliable measurements, it […]

1 2 3 Next »

Leave a Reply Cancel reply