DAkkS Calibration Certificates for Querx Sensors

Having measurement devices checked in a laboratory accredited by the DAkkS (German Accreditation Body) will assure you that the calibration was conducted in compliance with all current norms and laws and on a level that is internationally comparable. The temperature of a calibration object is measured by the device that is to be calibrated and […]

Calibrating Querx Sensors

When calibrating a device, its measurements are compared to an exceptionally precise reference device. The device that is calibrated is not intended to be adjusted in this process. DAkkS-Calibration egnite offers the Querx network sensors with the option of calibration certified by the German Accreditation Body (DAkkS). Whether or not you require this depends on […]

Temperature Sensors for Querx PT

Querx PT ships with a test sensor. This lets you use the device right out of the box by connecting it to an Ethernet network and a power supply. However, this sensor is really just a simple test sensor with a 100 mm PVC cable but no protective sleeve. While it returns reliable measurements, it […]

The Sporadic Glitch

A day in the hard life of a firmware developer 😉 It can occasionally happen that a manufacturer does not test their products carefully enough in all variations, leaving it to the customer to find remaining bugs. This is the banana-principle: The product ripens with the consumer. This is, of course, annoying for the customer, […]

Querx firmware 3.2.10

A new firmware images is available for downloading Bug fixes in Version 3.2.10 An error was removed from the SNMP MIB. The senosor table can now be imported by Paessler MIB importer. Sporadic Pt100 or Pt1000 sensor errors were ocassionally registered to late, which sometimes resulted in wrong values Failures were possible on writing the […]

Querx firmware 3.2.8

A new firmware version is available for all Querx network sensors. Changes in version 3.2.8 The email system now supports not only AUTH-PLAIN, but also the older AUTH-LOGIN authentication. Especially Microsoft exchange server need this method. The Ethernet communication of Querx PT and TH was improved The transmission of historical data was improved Sporadically occurring sensor […]

Update of Querx Discoverer

With the release of the current firmware versions for Querx (versions 3.*), we also needed to update the android app Querx Discoverer. Version 1.2 is now available for download at Google Play.  

Querx firmware version 3.2.7 für alle Geräte

Firmware version 3.2.7 for all Querx units available. Changes since version 3.2.4 The noticeable depiction of measurement gaps was withdrawn The DNS server can be set via DHCP despite having configured a static IP Bug fixes since version 3.2.4 For Querx PT and Querx TH, sending of emails to certain servers failed, which caused a reboot […]

Device Discoverer 2.0.2 available

– From Windows 7 on, limited broadcasts were only sent to a single network interface. After the changeover to directed broadcasts units could be found over any interface. Misconfigured devices, however, were not detected reliably. Device Discoverer now sends limited broadcasts over all active network interfaces. For troubleshooting Syslog, we have implemented a syslog server […]